Menu
BACK
BACK
A high performance PTFE Packing with no impregnation or additives, designed for use on Oxygen Applications and suitable for use with All Chemicals.
A high performance packing manufactured from a specially lubricated PTFE Yarn, suitable for all chemicals and solvents.
A high performance multi-filament Graphited PTFE Packing impregnated with High Temperature Lubricant. Recommended for its excellent performance at high pressure and its anti-extrusion properties.
A packing manufactured from High Strength Aramid Yarn, each filament coated with PTFE. Excellent operating length over a wide range of applications.
Similar to our E103 O Rings the Hollow in the Viton Core is for applications where more flexibility or an easier compression is required. This Encapsulated O Ring combines the Chemical Resistance of a TeflonFEP Outer Jacket with the energy of a hollow Dupont Viton Rubber Core. Viton is generally offered as the standard in Encapsulated O Rings because it has a good Compression Set.
This Encapsulated O Ring combines the Chemical Resistance of a Teflon®PFA Outer Jacket with the energy of a solid Silicone Rubber Core. Silicone Rubber is chosen as the core when Higher or Lower Temperature Range is required. The Teflon®PFA offers advantages over Teflon®FEP as it has improved mechanical, creep properties, abrasion resistance and a higher operating temperature.
Similar to our E105 O Rings the Hollow in the Silicone Rubber Core is for applications where more flexibility or an easier compression is required. This Encapsulated O Ring combines the Chemical Resistance of a Teflon®PFA Outer Jacket with the energy of a hollow Silicone Rubber Core. Silicone Rubber is chosen for the core where Higher & Lower Operating Temperatures are required. The Teflon®PFA offers advantages over Teflon®FEP as it has improved mechanical, creep properties, abrasion resistance and a higher operating temperature.
Similar to our E107 O Rings the Hollow in the Silicone Rubber Core is for applications where more flexibility or an easier compression is required. This Encapsulated O Ring combines the Chemical Resistance of a Teflon®FEP Outer Jacket with the energy of a hollow Silicone Rubber Core. Silicone Rubber is chosen for the core where a Lower Operating Temperature is required.
For Metering Pumps, Diverting Valves, Pressure Sensors, Pressure Regulators & Double Diaphragm Pumps.
Reduced Void Content results in less permeation, increased life, reduced potential for cross-contamination of process media as well as reducing costs and improved energy savings.
Increased Flexibility results in more time between changeovers, decreased labour and contamination costs, increase reliability and up-time as well as the protection of downstream equipment.
Conforms to USP Class VI Chapter 87 & 88, USP Parts 31,281 and 661, TSE Free.
The Gylon® ONE-UP® Diapragm is made up of Gylon® PTFE with an EPDM Rubber Backing and is idea for demanding applications within the Food, Pharmaceutical & Sanitary Industries. Made in a one piece design, this diaphragm is simple to install. Fits easily into the pump housing without the difficulty of installing two piece diaphragm sets
This Encapsulated O Ring combines the Chemical Resistance of a TeflonPFA Outer Jacket with the energy of a solid Dupont Viton Rubber. Viton is generally offered as the standard in Encapsulated O Rings because it has a good Compression Set. The TeflonPFA offers advantages over TeflonFEP as it has improved mechanical, creep properties, abrasion resistance and a higher operating temperature.
Similar to our E101 O Rings the Hollow in the Viton Core is for applications where more flexibility or an easier compression is required. This Encapsulated O Ring combines the Chemical Resistance of a TeflonPFA Outer Jacket with the energy of a hollow Dupont Viton Rubber Core. Viton is generally offered as the standard in Encapsulated O Rings because it has a good Compression Set. The TeflonPFA offers advantages over TeflonFEP as it has improved mechanical, creep properties, abrasion resistance and a higher operating temperature.
This Encapsulated O Ring combines the Chemical Resistance of a TeflonPFA Outer Jacket with the energy of a solid Dupont Viton Rubber. Viton is generally offered as the standard in Encapsulated O Rings because it has a good Compression Set.
An exceptional performing Steam Cured Viton® O Ring Cord with excellent Mechanical Properties. Ideal for use with Diester Lubricants, Halogenated hydrocarbons, Silicone Fluids, Petroleum Fluid, Skydrol, Selected Phosphate ester Fluids & Some Acids. Not intended for use with Amines, Brake Fluids, Hot water ( Above 100C), Ketones or Steam - This grade has FDA & 3A Approval.
Part of the Thistlebond range of high performance, Under Water rapid curing, synthetic metal Repair Compounds specifically developed for onsite repairs to metal components such as pump casings, leaking pipes and tank seams, damaged flange faces, stripped threads and cracked engine blocks. A two part epoxy resin system that produces a repair metal with high physical and mechanical strength.
Part of the Thistlebond range of rapid curing, moisture activated Emergency Pipe Repair Bandage specifically developed to repair leaking pipes. Activated by immersion in water this product solves leaks up to 10 bar or up to 50 bar when combined with UPS-19060-SG plugs.
Part of the Thistlebond range of rapid curing, moisture activated Emergency Pipe Repair Bandage specifically developed to repair leaking pipes. Activated by immersion in water this product solves leaks up to 10 bar or up to 50 bar when combined with UPS-19060-SG plugs.
Part of the Thistlebond range of rapid curing, moisture activated Emergency Pipe Repair Bandage specifically developed to repair leaking pipes. Activated by immersion in water this product solves leaks up to 10 bar or up to 50 bar when combined with UPS-19060-SG plugs.
Part of the Thistlebond range of rapid curing, moisture activated Emergency Pipe Repair Bandage specifically developed to repair leaking pipes. Activated by immersion in water this product solves leaks up to 10 bar or up to 50 bar when combined with UPS-19060-SG plugs.
Part of the Thistlebond range of rapid curing, moisture activated Emergency Pipe Repair Bandage specifically developed to repair leaking pipes. Activated by immersion in water this product solves leaks up to 10 bar or up to 50 bar when combined with UPS-19060-SG plugs.
Part of the Thistlebond range of high performance, rapid curing, Emergency Repair Engineering products specifically developed for onsite repairs to small leaking pipes, removing the need to replace pipework and enabling production to continue. A pack containing UPS-19601-PR bandages (5 Pieces) and UPS-19060-SG metal repair compound (1 Piece) that produces a long lasting repair with high physical and mechanical strength.
See individual products for technical properties
Absorbent Roll for Maintenance applications manufactured from melt blown polypropylene that is then ultrasonically bonded creating a dimpled surface. The rolls are hydrophilic, rapidly absorbing maintenance media liquids and providing excellent retention of media.
Absorbency Tested to BS7959-1:2004
Pack Quantity 1
Oil Absorbent Roll manufactured from melt blown polypropylene providing rapid absorbency and retention.
Being hydrophobic it repels water, allowing it to float for easy retrieval and disposal.
Pack Quantity 1
Oil Absorbent Pads manufactured from melt blown polypropylene these pads offer rapid absorbency and retention.
Being hydrophobic they repel water, allowing them to float for easy retrieval and disposal.
Pack Quantity 200
These cushions are ideal for absorbing and retaining higher volumes of spilt liquids in general maintenance environments.
They have a tough, durable, tear and UV resistant outer cover manufactured from polypropylene.
Perfect for use on major spills on land and in water, under machinery and during maintenance works.
100% Polypropylene Outer Layer and Filler
Pack Quantity 10
These socks are and essential part of any spill response plan and are ideal for absorbing large capacity spills of general liquids.
Designed with a strong outer skin that will not tear, they will not allow liquids to spread.
Perfect for creating a barrier around machinery or to divert or pool flammable liquids for absorption with pads or cushions.
100% Polypropylene Outer Layer and Filler
Pack Quantity 10
General Maintenance Absorbent Mini Roll manufactured from melt blown polypropylene fibres, ultrasonically bonded and laminated with a spunbond layer on one side to improve tear resistance. Delivering excellent absorbency and fluid retention.
Absorbency Tested to BS7959-1:2004
This product can be incinerated, allowing you to reduce disposal costs.
Pack Quantity 1
General Maintenance Absorbent Pads manufactured from melt blown polypropylene fibres, ultrasonically bonded and laminated with a spunbond layer on one side to improve tear resistance. Delivering excellent absorbency and fluid retention.
Absorbency Tested to BS7959-1:2004
This product can be incinerated, allowing you to reduce disposal costs.
Pack Quantity 100
Absorbent Granules for all industrial situations this product performs especially well on oils and greases.
Manufactured from recycled minerals they are non-combustible and non-toxic. With a medium bulk density this product is ideal for outdoor use and has good resistance to traffic spread.
Pack size 15L Bag
Absorbent Granules for all industrial situations this product performs especially well on oils and greases.
Manufactured from recycled minerals they are non-combustible and non-toxic. With a medium bulk density this product is ideal for outdoor use and has good resistance to traffic spread.
Pack size 20L Bag
A High Quality Grade Y Compressed Fibre Jointing manufactured from a blend of Heat Resistant Fibres and elastomeric binder. Approved to DIN-DVGW, WRAS and BS7531 Grade Y.
A Low Cost Jointing material for Low-Tech applications including hot and cold water, low pressure steam, fuels, gases, oils and some chemicals. This material is WRAS Approved.
Absorbent Pads for Maintenance applications manufactured from melt blown polypropylene that are then ultrasonically bonded creating a dimpled surface. These pads are hydrophilic, rapidly absorbing maintenance liquids and providing excellent retention of media.
Absorbency Tested to BS7959-1:2004
Pack Quantity 200
P090 is manufactured from pure PTFE spirally wrapped to form a cord for fitting into restricted gland spaces. This production method reduces lateral flow and the possibility of extrusion. For use in Valve Gland Packings or universal flange gasket. Suitable for use with water, steam, oils, solvents, oxygen, gases and all chemicals with the exception of molten alkali metals and fluorine.
EU1935:2004 FDA & WRAS Approved Silicone Sheeting 40° Shore A Hardness. This material meet the following flammability specs. FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal, flammability tests and Automotive Standard Part 571FMVSS302
A hard wearing lightweight open grid matting that is ideal for applications where areas are wet and slippery, or where you need to be able to remove and re-lay quickly for cleaning.
The PVC material is anti-microbial and anti-fungal and is resistant to most chemicals and cleaning agents.
J201 is a universal grade of Silica filled PTFE suitable for many general applications. Suitable for use with strong Acids & Alkalis, solvents, fuels, water, steam and chlorine. The grade has very low gas permeability and excellent creep resitance.
High Performance glass fibre filled PTFE Sheet with biaxal strength suitable for standard and irregular flanges. Designed for low bolt torque applications and irregular flanges. Suitable for use on glass lined vessels, ceramic or plasic flanges where there is uneven surface finish.Suitable for a wide spectrum of chemicals across the whole PH range. J202 has Low Gas Permeability and excellent Creep resistance.
A premium quality EPDM Rubber Sheeting that meets the requirements of BS EN 681-1-WA. A soft rubber at 50 IRHD, the compound is WRAS approved (Ref 161153).
27118 is a highly versatile medium firmness Silicone offering the lightness of a foam with the sealing capabilities of a traditional Sponge Rubber. Use to seal against penetration of dust, moisture, air and light within indoor or outdoor enclosures, such as lighting and electronics and Heating Ventilation and Air Conditioning. This product has, Excellent Memory and low stress relaxation, Good Resistance to Ultraviolet light, ozone, extreme temperatures and flame, FDA Compliance in accordance with FDA Regulation 21 CFR 177.2600
European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer (EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600
European Union Manufactured FoodSafe Grade Butadiene Acrylonitrile Rubber (NBR) Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.
European Union Manufactured FoodSafe Neoprene/Chloroprene(CR) Rubber Sheeting conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/6 & FDA CFR Sub Part C 177.2600. Maclellan EU1935 Grades are Independently Certified Nitrosamine Free.
A Polyether Polyurethane, FDA compliant, suitable for a wide range of applications in the Food Industry.
The material has excellent mechanical properties and wear resistance, is flexible and can be welded to fabricate a range of finished products including Flexible Sleeves, Connectors, and Screens.
Available as clear sheet material or in primary colours for specific applications, subject to minimum production batches. Also available in anti-static options.
Manufactured in a range of thicknesses from 0.35mm to 2.5mm, with tolerances of +/-0.05mm on thicknesses up to 0.6mm, and +/- 0.15mm for 1mm and above.
Roll width to suit your requirements up to 1.6mtr.
Elevate AFR is a high visibility matting designed specifically to perform in the highly regulated food processing and preparation industries.
Supplied in rolls 10mtr long x 91cm wide with easy snap
connectors to allow multiple rolls to be linked together to cover longer or wider areas.
Manufactured from a flexible animal fat resistant PVC
infused w/anti-microbial and anti-fungal additive so it is resistant to animal fats and oils. Designed with a 2.9cm x 1.9cm widely spaced grid which enables fluids and by-products to fall through while elevating employees above it.
Elevate AFR is up to 65% lighter than conventional rubber drainage mats so it is easy to install, clean, roll up and move.
MacNetic is a Premium Grade Blue Nitrile Rubber Sheet Metal Detectable by electromagnetic sensors and magnetic detectors. Coloured Blue for industry compliance within the Food, Pharmaceutical, Chemical and Cosmetics industries.
Independently certified EU1935:2004 compliant for contact with foodstuffs, Nitrosamine Free, Bisphenol A (BPA) Free and Animal Derived Ingredients Free (ADI).
Suitable for applications including gaskets, seals, joints, skirts and curtains within safety critical industries.
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 6mm and 5 Metres Long for 8mm and above.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
LascarOil is a high performance coated fabric produced using high strength cotton fabric and premium quality Nitrile Rubber compound.
The material is supplied as an uncured sheeting and then used in the manufacture of profiled seals, which when vulcanised are suitable for use in a wide range of equipment in the processing of abrasive powders, hydrocarbons, oils, fats, greases and hydraulic fluids.
Closed Cell Silicone Sponge suitable for applications requiring avoidance of dust or water ingress up to IP65 standards. The material meets WRAS, FDA and Flammability standards including FAR 25/JAR 25/CS 25 Appendix F Part 1, (a)(1)(iv) and (a)(1)(v).
The material has excellent resistance to ozone, oxidation, UV, ionising radiation and weathering.
Premium grade EPDM rubber gasketing designed to meet the stringent requirements of the NSF Standard 61 for products used in potable water. Meets or exceeds AWWA C111/A21.11 compound requirements.
This product is manufactured to order and therefore may be subject to minimum production batch quantities.
European Union Manufactured FoodSafe Grade Ethylene Propylene Diene Monomer(EPDM) Rubber Sheeting conforming to all latest Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.2600
Typically sold in Rolls that are 1.4 Metre Wide and 10 Metres Long for Thicknesses up to 8mm and 5 Metres Long for 8mm and above.
We supply this grade of Rubber Sheet in 1mm,1.5mm, 2mm,3mm,4mm, 5mm,6mm,8mm,10mm,12mm, 15mm & 25mm Thick.
Rubber Rolls will normally be Palletised and sent using a National Pallet Network.
Carboxylated Nitrile (XNBR) is a special type of nitrile polymer that exhibits enhanced tear and abrasion resistance while retaining excellent oil and solvent resistance.
XNBR compounds also provide high tensile strength and good physical properties at high temperatures.
This grade is also available in White and Grey colours
Carboxylated Nitrile (XNBR) is a special type of nitrile polymer that exhibits enhanced tear and abrasion resistance while retaining excellent oil and solvent resistance.
XNBR compounds also provide high tensile strength and good physical properties at high temperatures.
MacMat-SD is a high grade PVC matting, weather resistant and Fire Rated to UL94 V0. Manufactured with High Visibility Yellow and Green Bars to assist with Social Distancing Queuing at 1mtr and 2mtr intervals or with High Visibility Blue Bars for Social Distancing between Work Stations.
The printed text can be bespoke to your requirements subject to minimum production batches and lead times.
Offered in standard rolls of 10mtr x 1.2mtr wide and either 3.5mm or 6mm thickness dependent upon your environment and level of footfall.
A high performance FoodSafe material that helps pharmaceutical and food manufacturers to reduce the risk of product contamination by early detection and containment of contamination. The material is electrically conductive so fragments as small as 2mm can be identifed by in-line metal detection and X-ray equipment.
The material is certified to meet the requirements of FDA CFR21 Section 177.2600 and EU1935, and is Animal Derived Ingredients (ADI) Free.
Available as moulded sheets, extrusions and moulded seals.
A 90° Shore European Manufactured EPDM Rubber Sheeting in Black with excellent Weathering & Ozone Resistance. The assurance of consistency of manufacture process and batch testing offered by European Manufacturers.
A good quality general purpose Latex Natural Rubber Sheeting with good transparency in natural colour. This material is widely used for vacuum blankets in composite mouldings, as a Bakery release film, for cut diaphragms, seals and gaskets, for manufacture or flexible connectors and in medical environments as surgical straps and tourniquets.
Grade S formulation Sheeting in Natural and White colours meet the requirements of BGVV, FDA CRF21 section 177.2600 - Rubber Articles for repeated use in contact with foodstuffs.
An extremely high performance product manufactured by combining Nano PTFE Particles and FKM polymer to create a Low Friction, Low Gas Permeable, High Tensile and Abrasion Resistant material with wide ranging Chemical Resistance, suitable for a range of Sealing application in Medical, Bio-Chemical, Petrochemical and the Food and Drink Industries.
This material is tested and approved to USP Class VI, FDA Compliant and capable of meeting the requirements of many other Food and Drinking Water standards.
Currently produced as moulded sheets for the manufacture of Seals and Gaskets or as a compound for mouldings and extrusions.
Closed Cell Silicone Sponge suitable for applications requiring avoidance of dust or water ingress up to IP65 standards. The material meets WRAS, FDA and Flammability standards including FAR 25/JAR 25/CS 25 Appendix F Part 1, (a)(1)(iv) and (a)(1)(v) and Automotive Standard PART 571FMVSS302, and passes UL94 HB.
The material has excellent resistance to ozone, oxidation, UV, ionising radiation and weathering.
A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Hot Potable Water Applications up to 85C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within Europe for this critical Application.
PVC Modular Interlocking Tile System that is extremely versatile for a number of applications.
European Union Manufactured Food Safe Grade Natural Rubber (NR) Rubber Sheet conforming to all latest FoodSafe Specifications and Best Practice including EU1935:2004 2023/26 & FDA CFR 177 Sub Part C 177.260
A general purpose closed cell, medium density, silicone sponge for use in extreme temperature applications where environmental resistance is needed.
Accreditations include UL94HB, FMVSS 302, FAR 25 (Horizontal) and WRAS.
The material meets the technical requirements of ASTM D1056 2A2, AMS3195, ASTM 6576 Grades A, B and C (Soft-medium).
A high quality Silicone Rubber Sheeting containing additives which are visible to metal detector scanning equipment, ensuring that any particles contaminating the product can be easily identified.
Also available in moulded sheets with an Anti-Microbial additive for applications where both features are required.
This material is suitable for Seals and Gasket applications in the Food, Drink and Pharmaceutical Industries.
A UK Manufactured Water Research Advisory Service (WRAS) Approved EPDM for use in Potable Water Applications up to 23C. All gaskets used in Drinking Water Applications must be made from WRAS Approved Materials and MacLellan is committed to using only materials manufactured within the European Union for this critical Application.
|
|
|
01902 307711
